Hoenle Bluepoint LED eco

The UV curing spot lamp bluepoint LED eco from Hoenle provides high intensity, light curing energy for industrial assembly processes involving UV and visible light curing adhesives, coatings, and sealants. Up to four LED heads can be powered from a single bluepoint LED eco power control unit. The multiple LED heads can be programmed to operate simultaneously, in sequence, or independently. The Hoenle bluepoint LED eco is available with LED wavelengths of 365, 385, and 405nm.

Its incredibly small size (65 x 160 x 130 mm) makes the bluepoint LED eco ideally suited for integration into automated processing equipment. Bench space requirements in expensive cleanrooms can also minimized with the tiny footprint of the bluepoint LED eco. Programming, process monitoring and software downloads can be carried out via the device interface.

A power adjustment feature provides the ability to reduce output intensity from 100% to as low as 10% for maximum operating and adhesive curing efficiency. Process Flow Control permits full programming of the curing cycle including selecting alternating intensities and dwell times for efficient bonding and parts handling.

The bluepoint LED eco requires no warm-up time and provides instant on/off control. Actuation of the LEDs can range from 0.01-9999.0 seconds. Each LED head is equipped with a removable holding fixture for easy mounting. This mounting block also serves as a heatsink for the LED head. UV and Visible light adhesive bonding can be optimized with focusing lenses that adjust light footprint and intensity to create application-specific curing processes. Intensities as high as 20,000 mW/cm2 (405nm) can be achieved.

Optimized curing and high intensity output combine to produce the shortest adhesive curing cycles for your assembly process.

Typical applications for the bluepoint LED eco include the curing of UV adhesives, potting materials, and coatings associated with component assembly in the medical, micro-electronics, mobile device, and transportation industries.

UV Spot lamp bluepoint LED eco to cure adhesives

UV curing spot lamp with four LED heads: Bluepoint LED eco from Hoenle

Technical Data for Honle Bluepoint LED eco

LED service life: > 20.000 hours*
Max. UVA intensity: up to 20.000 mW/cm² **
Adjustment range of timer: 0.01 – 9999 sec or continuous operation
Wavelengths: 365 nm, 385 nm, 405 nm
Power supply: 20 V – 28 V DC or power pack
Max. input current: 3.5 A
Dimensions (H x W x D) 65 x 160 x 130 mm
Weight: approx. 0.5 kg

* typical lifetime under specified operating conditions

** depending on the LED head used, measured with Hönle UV meter with LED sensor

System Solutions with Hoenle bluepoint LED eco and Vitralit® adhesives:

UV Curable Acrylic Adhesives

Hoenle offers UV system solutions with uv curable acrylate adhesives from Panacol

more info >

UV Curable Epoxy Adhesives

System solutions with UV curable epoxy adhesives from Panacol are available

more info >

UV-LED Curable Adhesives

Unlike gas discharge lamps, LED light sources have a monochromatic light spectrum. Therefore, LED devices used for curing adhesive need a wavelength matched to the curing requirements of the particular adhesive used. 

more info >